Dongguan Yuansheng Storage Equipment Co., Ltd.
Contact person: Manager Liu
Tel:13712048009
Landline:0769-85302882/85302815
E-mail:yuansheng68@163.com
Address: Huaide Industrial Zone, Humen Town, Dongguan City
Manufacturing process:
1. Rolling process:
(raw material) coil plate - slitting - automatic punching - rolling forming - fixed length - automatic tracking of flying saw cut - flat head - CO2 protective welding - grinding and removing thorn - black parts - surface deal with.
2, automatic punching:
It has a fully automatic continuous punching production line, which is used to complete the punching of the column profile before the drawing. The hole spacing accuracy can reach 0.02mm, and the total length of the column is less than 2mm.
3. Cold rolling forming:
The shelf column and various beams have their own automatic cold-form forming units, which are automatically positioned and cut according to the required length, and the length dimension error is not more than 1mm.
4, welding:
All are welded by carbon dioxide protection welder to ensure the quality of the weld and the smooth and beautiful weld.
5, column:
1 material: cold rolled steel plate;
2 color: blue (can be customized according to customer requirements);
3 columns and transverse braces and diagonal braces are connected by galvanized bolts;
4 When fully loaded, the maximum deflection of the column is not more than 1/1000H;
5 The bottom of the heavy-duty shelf column is equipped with a bottom plate, and the bottom plate and the ground are connected by expansion bolts to ensure the stability of the shelf;
The total height of the 6-shelf column is determined according to the design requirements. The hole spacing of the column is 50, 75mm. The layer height can be adjusted freely. The cumulative error of the hole spacing is ±1mm.
7The convex column is adopted, the section is optimized, and the bearing capacity is strong; (The column can be carried according to the design requirements, the common column: medium column 55*45, heavy column: 90*65).
6, the beam
1 material: cold rolled steel plate;
2 color: orange color (can be customized according to customer requirements);
3 Each beam is equipped with a safety pin to increase the safety factor;
4 When the beam is fully loaded, its maximum deflection is not more than 1/200L;
The 5 beams and the column are connected by hanging teeth, which are inlaid without gaps, and have large contact area and good reliability;
6The combination of cross-beam or P-beam is adopted, the section is optimized, the bending capacity and the bearing capacity are strong; (the selection of the beam is selected according to the span and the load. The conventional size: P-beam has 60*40, 80*40, and the composite beam has 80*45, 100*45, 120*45, 140*45).