How to extend the service life of the mold rack?

1. Apply protective paint regularly to reduce rust, do daily inspections, and fix the screws where they are loose. Make timely ventilation and keep the warehouse from excessive moisture.

2, to avoid excessive sun exposure, reasonable ventilation of the mold frame, to prevent wet goods placed on the mold frame, should be drained and dehumidified as much as possible.

3, according to different mold racks, channel width and transport tools with a set of anti-collision columns. Install a crash barrier at the channel location.

4. The weight of the goods placed on the mold frame must be within the weight of the mold frame. It is best for the warehouse cargo manager to carry out the load-bearing load-limiting logo on the mold rack. It is necessary to follow the principle that the bottom of the mold frame is light and heavy, that is, the bottom layer is heavy, and the upper layer is light.

5, heavy and high-level mold rack warehouse must be equipped with a power pusher, the use and operation of the pusher must be operated by a licensed person.

6, the provisions of the mold frame use system. Different warehouses, different goods, and different warehouses have different ways of using them.